DSP 7010 Series – Dynamometer Controller

Support & Downloads

Product BrochureProduct ManualProduct DatasheetSystem Configurations

Product Description

Magtrol’s DSP 7010 Series – Dynamometer Controller employs advanced Digital Signal Processing technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP 7010 can provide complete PC control via the USB or GPIB interface. With up to 488 readings per second, the DSP 7010 is ideally suited for both the test lab and the production line.

Features

  • DSP7011 Single Channel: Cost-effective & User-friendly
  • DSP7012 Dual Channel: Versatile with complete functionality; allows two fully independent configurations
  • Speed & Torque Operating Modes: Provides independent PID settings for improved Dynamometer control
  • Built-In Alarm System: power, speed, torque, temperature, air flow, water flow, electrical overload and external inputs
  • Can be used independently or, ideally, in combination with Magtrol software to meet all requirements of motor testing
  • High Speed Data Acquisition: ≤ 488 samplings / second (torque, speed, time, angle, etc.)
  • Fast Full-Curve Data Acquisition: Free-run to locked rotor in seconds
  • Programmable Digital PID Values: Controlled and stored via M-TEST Software or controlled manually
  • Built-in Current-Regulated Supply: ≤ 1A
  • Selectable Torque Units: Imperial, Metric and SI
  • Digital Filter for Torque Signals
  • PC Connection: USB & GPIB (IEEE-488.2)
  • Position Measurement: two quadrature decoders
  • Built-in I/O card accessible with software
  • Operation via frontpanel keyboard computer
  • High Quality, Easy-to-Read Vacuum Fluorescent Readout
  • Desktop Housing or Rack Mounting (19″ / 2U)
  • Command Compatible: compatible with the DSP 7000

Specifications

MEASUREMENT CHARACTERISTICS
Maximum Torque 99 999 units
Maximum Speed 199 999 RPM
Torque Accuracy 2 V range ±0.01 % of range (±0.2 mV) (used on all HD Series other than HD 5 Series)
10 V range ±0.01% of range (±1 mV) (used on all except HD Series)
Speed Accuracy 0.01 % of reading from 5 ... 199 999 rpm
ELECTRICAL CHARACTERISTICS
Voltage Requirements 85-264 VAC 50/60 Hz
Power Requirements 210 VA
Fuses (5 × 20 mm) IEC T 2.5 A 250 V L
Max. Compliance Voltage 48 V DC, Brake Output
Max. Brake Output Current 1 Amp, Calibrated that 100% open loop = 1 Amp
TSC Power Supplies Torque Sensor: 24 V DC, max. 200 mA (power supply fault protected)
Encoder: 5 V DC, max. 200 mA (internal fuse at 500 mA)
ENVIRONMENT
Operating Temperature 5 ºC ... 40 ºC
Relative Humidity < 80%
Temperature Coefficient 0.004% of range/°C of 5 V DC for both channels
Altitude max. 2 000 m

Applications

In the laboratory, the DSP7010’s high sample rate provides superior resolution for data acquisition and curve plotting. This allows capturing more usable motor test data during switching, breakdown and other transitional areas of the motor test curve. For production and incoming inspection, the DSP7010 displays torque, speed and power at all times, allowing the Controller to be used as a manual stand-alone unit or as part of a complete PC system.

WP_Query Object
(
    [query] => Array
        (
            [post_type] => product
            [ignore_sticky_posts] => 1
            [no_found_rows] => 1
            [posts_per_page] => -1
            [orderby] => rand
            [post__in] => Array
                (
                    [0] => 887
                    [1] => 507
                    [2] => 877
                    [3] => 613
                )

            [post__not_in] => Array
                (
                    [0] => 12014
                )

        )

    [query_vars] => Array
        (
            [post_type] => product
            [ignore_sticky_posts] => 1
            [no_found_rows] => 1
            [posts_per_page] => -1
            [orderby] => rand
            [post__in] => Array
                (
                    [0] => 887
                    [1] => 507
                    [2] => 877
                    [3] => 613
                )

            [post__not_in] => Array
                (
                    [0] => 12014
                )

            [error] => 
            [m] => 
            [p] => 0
            [post_parent] => 
            [subpost] => 
            [subpost_id] => 
            [attachment] => 
            [attachment_id] => 0
            [name] => 
            [static] => 
            [pagename] => 
            [page_id] => 0
            [second] => 
            [minute] => 
            [hour] => 
            [day] => 0
            [monthnum] => 0
            [year] => 0
            [w] => 0
            [category_name] => 
            [tag] => 
            [cat] => 
            [tag_id] => 
            [author] => 
            [author_name] => 
            [feed] => 
            [tb] => 
            [paged] => 0
            [meta_key] => 
            [meta_value] => 
            [preview] => 
            [s] => 
            [sentence] => 
            [title] => 
            [fields] => 
            [menu_order] => 
            [embed] => 
            [category__in] => Array
                (
                )

            [category__not_in] => Array
                (
                )

            [category__and] => Array
                (
                )

            [post_name__in] => Array
                (
                )

            [tag__in] => Array
                (
                )

            [tag__not_in] => Array
                (
                )

            [tag__and] => Array
                (
                )

            [tag_slug__in] => Array
                (
                )

            [tag_slug__and] => Array
                (
                )

            [post_parent__in] => Array
                (
                )

            [post_parent__not_in] => Array
                (
                )

            [author__in] => Array
                (
                )

            [author__not_in] => Array
                (
                )

            [suppress_filters] => 
            [cache_results] => 
            [update_post_term_cache] => 1
            [lazy_load_term_meta] => 1
            [update_post_meta_cache] => 1
            [nopaging] => 1
            [comments_per_page] => 50
            [order] => 
        )

    [tax_query] => WP_Tax_Query Object
        (
            [queries] => Array
                (
                )

            [relation] => AND
            [table_aliases:protected] => Array
                (
                )

            [queried_terms] => Array
                (
                )

            [primary_table] => wp_posts
            [primary_id_column] => ID
        )

    [meta_query] => WP_Meta_Query Object
        (
            [queries] => Array
                (
                )

            [relation] => 
            [meta_table] => 
            [meta_id_column] => 
            [primary_table] => 
            [primary_id_column] => 
            [table_aliases:protected] => Array
                (
                )

            [clauses:protected] => Array
                (
                )

            [has_or_relation:protected] => 
        )

    [date_query] => 
    [request] => SELECT   wp_posts.* FROM wp_posts  WHERE 1=1  AND wp_posts.ID IN (887,507,877,613) AND wp_posts.post_type = 'product' AND (wp_posts.post_status = 'publish')  ORDER BY RAND() 
    [posts] => Array
        (
            [0] => WP_Post Object
                (
                    [ID] => 877
                    [post_author] => 1
                    [post_date] => 2017-04-06 17:04:06
                    [post_date_gmt] => 2017-04-06 17:04:06
                    [post_content] => The PC-150 Polarity Changer uses Magtrol’s M-TEST 7 Software to remotely switch the polarity of a DC power supply in order to reverse the direction of the motor under test. When switching polarity, the voltage sense lines will also change in order to maintain the proper polarity on the power supply sense terminals.
                    [post_title] => PC-150 - 150 Amp Polarity Changer
                    [post_excerpt] => 
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => pc-150-150-amp-polarity-changer
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2024-10-16 09:39:09
                    [post_modified_gmt] => 2024-10-16 13:39:09
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=877
                    [menu_order] => 90
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

            [1] => WP_Post Object
                (
                    [ID] => 887
                    [post_author] => 1
                    [post_date] => 2017-04-06 17:16:29
                    [post_date_gmt] => 2017-04-06 17:16:29
                    [post_content] => The PCB Power Connection Box is a simple interface connection for powering a motor under test. One end is attached to a (customer-supplied) power supply and the other end is attached, via lead wires, to a test motor.
                    [post_title] => PCB - Motor Power Connection Box
                    [post_excerpt] => 
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => pcb-motor-power-connection-box
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2023-04-13 15:14:19
                    [post_modified_gmt] => 2023-04-13 19:14:19
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=887
                    [menu_order] => 69
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

            [2] => WP_Post Object
                (
                    [ID] => 613
                    [post_author] => 1
                    [post_date] => 2017-04-05 15:38:07
                    [post_date_gmt] => 2017-04-05 15:38:07
                    [post_content] => Magtrol's Model DSP7000 High-Speed Programmable. Dynamometer Controller employs state-of-the-art Digital Signal Processing Technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Brake Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP7000 can provide complete PC control via IEEE-488 or RS-232 interface. With up to 500 readings per second, the DSP7000 is ideally suited for both the test lab and the production line.
                    [post_title] => DSP7000 - High Speed Programmable Controller
                    [post_excerpt] => 
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => dsp7000-high-speed-programmable-controller
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2023-09-29 11:25:25
                    [post_modified_gmt] => 2023-09-29 15:25:25
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=613
                    [menu_order] => 61
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

            [3] => WP_Post Object
                (
                    [ID] => 507
                    [post_author] => 1
                    [post_date] => 2017-04-05 13:21:38
                    [post_date_gmt] => 2017-04-05 13:21:38
                    [post_content] => Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as the speed increases, reaching peak torque at rated speed. The dynamometers have low inertia as a result of small rotor diameter. Brake cooling is provided by a water circulation system, which passes inside the stator to dissipate heat generated by the braking power, providing high continuous power ratings (max. 140 kW). WB Series Dynamometers integrate a torque measuring system with accuracy ratings of ± 0.3 % to ± 0.5 % full scale, depending on size and system configuration.

Features


    
 	
  • 12 Models with Maximum Torque from 400 mN·m to 560 N·m (56.6 oz·in to 413 lb·ft)
    • 
 	
  • Braking Power: from 500 W to 140 kW
    • 
 	
  • Stable Braking Torque, without Shock
    • 
 	
  • Low Moment of Inertia
    • 
 	
  • Low Residual Torque
    • 
 	
  • Operating Direction CW / CCW
    • 
 	
  • Braking Torque Measurement Integrated
    • 
 	
  • High Rotational Speed (≤ 80 000)
    • 
 	
  • Integrated Optical Speed Sensor
    • 
 	
  • Special designs available upon request
    • 



Operating Principles

The WB Eddy-Current Dynamometers develop their full power at high rotation speeds. The WB Series is particularly intended for motors which rotate at high speeds, up to 80 000 rpm (up to 100 000 rpm with WB 23 / 27; see specific datasheet). The braking torque depends on the rotation speed.

Optical Speed Sensor
Each WB Series Dynamometer is equipped with an optical speed sensor. WB 32 is equipped with a 4 PPR (Pulses Per Revolution) encoder, WB 43 and WB 65 HS are equipped with a 30 PPR encoder; WB 65, WB 115 & WB 15 are equipped with a 60 PPR encoder.
                    [post_title] => WB Series - Eddy-Current Dynamometers
                    [post_excerpt] => 
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => eddy-current-dynamometers-wb-series
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2025-06-30 15:47:19
                    [post_modified_gmt] => 2025-06-30 19:47:19
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=507
                    [menu_order] => 46
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

        )

    [post_count] => 4
    [current_post] => -1
    [in_the_loop] => 
    [post] => WP_Post Object
        (
            [ID] => 877
            [post_author] => 1
            [post_date] => 2017-04-06 17:04:06
            [post_date_gmt] => 2017-04-06 17:04:06
            [post_content] => The PC-150 Polarity Changer uses Magtrol’s M-TEST 7 Software to remotely switch the polarity of a DC power supply in order to reverse the direction of the motor under test. When switching polarity, the voltage sense lines will also change in order to maintain the proper polarity on the power supply sense terminals.
            [post_title] => PC-150 - 150 Amp Polarity Changer
            [post_excerpt] => 
            [post_status] => publish
            [comment_status] => open
            [ping_status] => closed
            [post_password] => 
            [post_name] => pc-150-150-amp-polarity-changer
            [to_ping] => 
            [pinged] => 
            [post_modified] => 2024-10-16 09:39:09
            [post_modified_gmt] => 2024-10-16 13:39:09
            [post_content_filtered] => 
            [post_parent] => 0
            [guid] => https://www.magtrol.com/?post_type=product&p=877
            [menu_order] => 90
            [post_type] => product
            [post_mime_type] => 
            [comment_count] => 0
            [filter] => raw
        )

    [comment_count] => 0
    [current_comment] => -1
    [found_posts] => 0
    [max_num_pages] => 0
    [max_num_comment_pages] => 0
    [is_single] => 
    [is_preview] => 
    [is_page] => 
    [is_archive] => 1
    [is_date] => 
    [is_year] => 
    [is_month] => 
    [is_day] => 
    [is_time] => 
    [is_author] => 
    [is_category] => 
    [is_tag] => 
    [is_tax] => 
    [is_search] => 
    [is_feed] => 
    [is_comment_feed] => 
    [is_trackback] => 
    [is_home] => 
    [is_404] => 
    [is_embed] => 
    [is_paged] => 
    [is_admin] => 
    [is_attachment] => 
    [is_singular] => 
    [is_robots] => 
    [is_posts_page] => 
    [is_post_type_archive] => 1
    [query_vars_hash:WP_Query:private] => b0518fb39cd7e604e898d084eea5abfe
    [query_vars_changed:WP_Query:private] => 
    [thumbnails_cached] => 
    [stopwords:WP_Query:private] => 
    [compat_fields:WP_Query:private] => Array
        (
            [0] => query_vars_hash
            [1] => query_vars_changed
        )

    [compat_methods:WP_Query:private] => Array
        (
            [0] => init_query_flags
            [1] => parse_tax_query
        )

)

Related Products