product manuals

Magtrol  
 
 
 

Magtrol Equipment Manuals


Data Sheets • Product Brochures • PDF Reader Guide Obsolete Equipment

Current versions of most of Magtrol's equipment manuals can be obtained from our web site. Manuals are in the portable document file (PDF) format and are approximately 0.5 MB to 7 MB in size. In order to view/download/print them, you will need Adobe Acrobat Reader which can be downloaded free of charge from Adobe's web site

get acrobat
reader

Link to the desired manual by selecting from the menus above or by clicking on the flags below.

Product Group Model Product Description Revised* Language
Dynamometers HD / ED Hysteresis/Engine Dynamometers 08/2007 EnglishFrançaisDeutsch
 ---> --- Torque Signal Amplifier Board Upgrade Instructions
     ( 78D176 to TSC 401)
07/2007 English
 ---> --- Speed Pickup Modification 12/2001 English
DW Dial Weight Dynamometers 08/2006 English
WB/PB Eddy-current/Powder Brake Dynamometers 09/2005 EnglishFrançaisDeutsch
Micro Dyne Micro Dyne System 07/2008 English
Software M-TEST 5.0 M-TEST 5.0 Motor Testing Software - complete manual 05/2006 EnglishFrançaisDeutsch
M-TEST 5.0 M-TEST 5.0 Installation Instructions 05/2006 EnglishFrançaisDeutsch
Durability Test 1.0 Durability Test 1.0 12/2007 English
SM-TEST SM-TEST Stepper Motor Testing Software 06/2008 English
Motor Testing Controllers, Readouts and Conditioners
DSP6001 Programmable Dynamometer Controller 05/2005 EnglishFrançaisDeutsch
6200 Dynamometer Controller/Readout 06/2000 English
TSC 401 Torque/Speed Conditioner 07/2003 EnglishFrançaisDeutsch
Power Supplies for Motor Testing DES 310/311 Power Supply for WB/PB Dynamometers 03/2005 Français
6100 Closed Loop Speed Control/Power Supply 01/2005 English
5200-2 Power Supply (unregulated) 07/2006 English
5210-2 Current-Regulated Power Supply 07/2006 English
Motor Testing Accessories 5600 Direction Indicator 08/2000 English
FR 10 Free-Run Speed Sensor 02/2007 English
Power Analyzers 6510e High Speed Single-Phase Power Analyzer 11/2005 EnglishFrançaisDeutsch
6530 High Speed Three-Phase Power Analyzer 11/2005 EnglishFrançaisDeutsch
Torque Transducers & Electronics TM 300 In-Line Torque Transducers 12/2007 EnglishFrançaisDeutsch
TF Torque Flange Sensors 04/2008 EnglishFrançaisDeutsch
3410 Torque Display 08/2007 EnglishFrançaisDeutsch
6400 Torque Transducer Display 06/2004 English
Load-Force-Weight
Systems
LB / LE / LU Load Measuring Pins 04/2005 FrançaisDeutsch
LB Load Measuring Pins (see note) 10/1995 English
LE Load Measuring Pins (see note) 11/1995 English
LMU 112/117 Load Monitoring Unit (see note) 09/1997 EnglishFrançaisDeutsch
 ---> --- LMU 112/117 Common (Short) Calibration 01/2007 EnglishDeutsch
LMU 116 Load Monitoring Unit (see note) 12/1998 EnglishFrançaisDeutsch
AN 1500 M Load Monitor/Signal Conditioner/Display 01/2007 EnglishFrançais
AN 2000 C Load Monitor/Signal Conditioner/Display 05/2003 EnglishFrançais
GAC Large Remote Digital Displays 07/2008 EnglishFrançais
Tension/Torque
Control Products
HB / HC Hysteresis Brakes & Clutches 11/2003 EnglishFrançaisDeutsch
5250 Power Supply 09/2000 English
Rotary Signal Transmission RS Rotary Transmitters 09/2004 Français
Displacement Measurement DI 5XX / 6XX Displacement Transducers 11/2006 Français
DI 5XX Displacement Transducers (see note) 05/1997 EnglishDeutsch
CST 113 Signal Converter 1997 English
MD 152.1 (TF) Signal Amplifier 05/2004 EnglishDeutsch
NOTE: Some English and German manuals are in the process of being updated and are designated with "(see note)" after the description. The old version of these manuals are provided on this web site for information only. Magtrol assumes no responsibility for errors or omissions. Additionally, no liability is assumed for any damages that may result from the use of the information contained within these publications.
* Revision Date refers to the English version, unless no English language manual is available.


Obsolete Equipment

The following equipment is no longer in production but their last published manuals can be accessed here.


Product Group Model Product Description Revised Language
Software M-TEST 4.0 M-TEST 4.0 & MT-TEST 4.0 Motor Testing Software 02/04 EnglishFrançaisDeutsch
M-Test 3.1 M-TEST 3.1 & MT-TEST 3.1 Motor Testing Software 11/98 English
PF-Test 1.x Pass/Fail Test Motor Testing Software 10/00 English
Power Analyzers 4612B Power Analyzer --- English
4614B Three-Phase Power Analyzer (text only) 05/93 English
5100 Single-Phase Power Analyzer 02/01 English
5300 Three-Phase Power Analyzer 03/01 English
6510 High Speed Single-Phase Power Analyzer 05/01 English
Controllers and
Readouts
4615B Torque/Speed/Power Readout (text only) 11/90 English
4618B Torque/Speed Readout (text only) 08/92 English
4629B Dynamometer Controller --- English
5220 Dynamometer Controller 09/96 English
5230 Dynamometer/X-Y Controller 10/96 English
5240 Dynamometer Controller 01/00 English
5400 Tachometer --- English
5410 Torque/Speed Readout 09/01 English
DSP6000 High Speed Programmable Controller 06/00 English
Torque Transducers TM 200 In-Line Torque Transducers 01/97 English
TMF Torque Flange Transducers 08/03 English
3400 Torque Display 01/04 EnglishFrançaisDeutsch
Load-Force-Weight
Systems
AN 1500 P Signal Conditioner and Process Display 05/03 EnglishFrançaisDeutsch
AN 1500 C Signal Conditioner and Process Display 05/03 EnglishFrançaisDeutsch
Rotary Signal
Transmission
MT 4/A Rotary Transmitter (4-channel) 03/89 English
MT 8/A Rotary Transmitter (8-channel) 02/88 English
 
Top of page go to top of page
Magtrol Inc. (USA): +1-716-668-5555 • magtrol@magtrol.com  |  Magtrol SA (Switzerland): +41 (0)26 407 3000 • magtrol@magtrol.ch
© 1995-2008 Magtrol, Inc.