-
View ProductRead moreZC Series – Load Cells
The load cells of the ZC series have been designed for application in platform scales in the classes C1 to C3 according to OIML-RI 60 for platform sizes up to 600The load cells of the ZC series have been designed for application in platform scales in the classes C1 to C3 according to OIML-RI 60… Read more »
-
View ProductRead moreZF Series and ZF-S Series – Force Transducers
The force transducers of the ZF / ZF-S Series have been designed for the measurement of static and dynamic tensile and pressure forces; they are characterized by their low assembly height at a high measuring accuracy. The force is introduced on one side through a central tapped hole, the other side of the force transducer… Read more »
-
View ProductRead moreZM Series – Force Transducers
Magtrol’s ZM Series Force Transducers are designed to measure static and dynamic pressure forces. They are characterised by their small dimensions. Manufactured in stainless steel or high-resistance aluminum, these transducers can be used in a wide variety of applications. In particular, the stainless steel versions with a high degree of protection can be used everywhere… Read more »
-
View ProductRead moreZP-S Series – Force Transducers
The force transducers of the ZP-S Series are designed for the measurement of static and dynamic forces and are characterized by their low dimensions at a high measuring accuracy. The force is introduced centrally through a tapped hole. A strain gauge bridge converts the elastic deformation of the S-shaped flexible body into an electrical signal… Read more »
-
View ProductRead moreZS Series – Load Cell
The ZS load cells are made entirely of a special stainless steel and are, therefore, also suitable as weighing plants under difficult environmental conditions. The sensor element itself is fabricated as a transverse body. A metal diaphragm, which is welded on to the deformation zone protects the sensitive strain gauges from environmental influences. As a… Read more »
-
View ProductRead more5212 – Current Regulated Power Supply
The 5212 is a 0-1A current-regulated 24 VDC power supply and display that is designed for use with Magtrol’s hysteresis brakes and clutches. It features a 10-turn current adjustment potentiometer and 3 selectable current ranges: 200 mA, 500 mA, and 1000 mA. A convenient built in panel meter displays the value of output current. The… Read more »
-
View ProductRead moreSG-01 – Cable Sensor
The SG-01 cable sensor is designed for providing load monitoring of permanent and temporary anchors and allows continuous measuring either by a direct or remote control system. The specific design allows the use of a SG-01 sensor in harsh, tropical or harbor environments.
-
View ProductRead moreSK-02 Series – Cable Force Transducer
The SK-02 Cable Sensor is a low cost load cell specially designed to measure the tension force on hoisting rope. Easy installation does not require the hoist to be dismantled nor modified. The SK-02 sensor family covers a large range of cable diameters from 8 to 36 mm and loads 8 k·N (~800 kg) to… Read more »
-
View ProductRead moreZL-03 – Traction Force Transducer
The Magtrol ZL-03 Traction Force Transducer utilizes Strain Gauge Technology and was designed to support the load for long-term dynamic stresses. Connected to a signal conditioner, the transducer will provide signal proportional to the measured load.
-
View ProductRead more7500 Series – Power Analyzer
The Magtrol 7500 Series Power Analyzer is an easy-to-use instrument ideal for numerous power measurement applications. From DC to 80 kHz AC, the 7500 measures volts, amps, watts, volt-amps, frequency, crest factor, Vpeak, Apeak and power factor in one convenient display. They may be used either as stand-alone instruments or in conjunction with any Magtrol… Read more »
-
View ProductRead moreBrake-Clutch Selection | How to Select a Brake or Clutch
-
View ProductRead moreCTS 100 Series – Cogging Test System
Magtrol’s Cogging Test System is a stand-alone test system designed to control and measure Detent Torque, Cogging Torque and Friction Torque. The test System includes a precision geared motor, a TS Series Torque Sensor integrating a 5 000 pulses encoder. CTS 100 to CTS 102 have a built-in security clutches to avoid system overload by… Read more »
-
View ProductRead moreM-TEST 7 – Motor Testing Software
Download free 30 day trial of M-TEST 7 Motor Testing Software.
-
View ProductRead moreTORQUE 10 – Software
-
View ProductRead moreDual Test 7 – Motor Testing Software
Magtrol’s DUAL TEST 7 is a state-of-the-art motor testing software for PC (Windows® XP sp3/7/8) based data acquisition. Used with a Magtrol Programmable Dynamometer Controller DSP7012, DUAL TEST 7 works on two channels independently with any Magtrol Dynamometer or In-Line Torque Transducer to help determine the performance characteristics of a motors under test. Up to… Read more »
-
View ProductRead moreEM-TEST – Endurance Motor Testing Software
Magtrol’s EM-TEST is an Endurance Motor Testing Software for PC (Windows 7 SP1 / 10) based data acquisition. Combined with a Magtrol DSP 7000 Series High Speed Programmable Controller, EM-TEST works with any Magtrol dynamometer or in-line torque transducer to determine the performance characteristics of a motor under test. Up to 128 parameters are calculated… Read more »
