DSP7010 Series – Dynamometer Controller

Support & Downloads

Product BrochureProduct ManualProduct Datasheet

Product Description

Magtrol’s DSP 7010 Series – Dynamometer Controller employs advanced Digital Signal Processing technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP 7010 can provide complete PC control via the USB or GPIB interface. With up to 488 readings per second, the DSP 7010 is ideally suited for both the test lab and the production line.

Features

  • DSP7011 Single Channel: Cost-effective & User-friendly
  • DSP7012 Dual Channel: Versatile with complete functionality; allows two fully independent configurations
  • Speed & Torque Operating Modes: Provides independent PID settings for improved Dynamometer control
  • Built-In Alarm System: power, speed, torque, temperature, air flow, water flow, electrical overload and external inputs
  • Can be used independently or, ideally, in combination with Magtrol software to meet all requirements of motor testing
  • High Speed Data Acquisition: ≤ 488 samplings / second (torque, speed, time, angle, etc.)
  • Fast Full-Curve Data Acquisition: Free-run to locked rotor in seconds
  • Programmable Digital PID Values: Controlled and stored via M-TEST Software or controlled manually
  • Built-in Current-Regulated Supply: ≤ 1A
  • Selectable Torque Units: Imperial, Metric and SI
  • Digital Filter for Torque Signals
  • PC Connection: USB & GPIB (IEEE-488.2)
  • Position Measurement: two quadrature decoders
  • Built-in I/O card accessible with software
  • Operation via frontpanel keyboard computer
  • High Quality, Easy-to-Read Vacuum Fluorescent Readout
  • Desktop Housing or Rack Mounting (19″ / 2U)
  • Command Compatible: compatible with the DSP 7000

Specifications

MEASUREMENT CHARACTERISTICS
Maximum Torque 99 999 units
Maximum Speed 199 999 RPM
Torque Accuracy 2 V range ±0.01 % of range (±0.2 mV) (used on all HD Series other than HD 5 Series)
10 V range ±0.01% of range (±1 mV) (used on all except HD Series)
Speed Accuracy 0.01 % of reading from 5 ... 199 999 rpm
ELECTRICAL CHARACTERISTICS
Voltage Requirements 85-264 VAC 50/60 Hz
Power Requirements 210 VA
Fuses (5 × 20 mm) IEC T 2.5 A 250 V L
Max. Compliance Voltage 48 V DC, Brake Output
Max. Brake Output Current 1 Amp, Calibrated that 100% open loop = 1 Amp
TSC Power Supplies Torque Sensor: 24 V DC, max. 200 mA (power supply fault protected)
Encoder: 5 V DC, max. 200 mA (internal fuse at 500 mA)
ENVIRONMENT
Operating Temperature 5 ºC ... 40 ºC
Relative Humidity < 80%
Temperature Coefficient 0.004% of range/°C of 5 V DC for both channels
Altitude max. 2 000 m

Applications

In the laboratory, the DSP7010’s high sample rate provides superior resolution for data acquisition and curve plotting. This allows capturing more usable motor test data during switching, breakdown and other transitional areas of the motor test curve. For production and incoming inspection, the DSP7010 displays torque, speed and power at all times, allowing the Controller to be used as a manual stand-alone unit or as part of a complete PC system.

WP_Query Object
(
    [query] => Array
        (
            [post_type] => product
            [ignore_sticky_posts] => 1
            [no_found_rows] => 1
            [posts_per_page] => -1
            [orderby] => rand
            [post__in] => Array
                (
                    [0] => 899
                    [1] => 906
                    [2] => 613
                    [3] => 522
                )

            [post__not_in] => Array
                (
                    [0] => 9308
                )

        )

    [query_vars] => Array
        (
            [post_type] => product
            [ignore_sticky_posts] => 1
            [no_found_rows] => 1
            [posts_per_page] => -1
            [orderby] => rand
            [post__in] => Array
                (
                    [0] => 899
                    [1] => 906
                    [2] => 613
                    [3] => 522
                )

            [post__not_in] => Array
                (
                    [0] => 9308
                )

            [error] => 
            [m] => 
            [p] => 0
            [post_parent] => 
            [subpost] => 
            [subpost_id] => 
            [attachment] => 
            [attachment_id] => 0
            [name] => 
            [static] => 
            [pagename] => 
            [page_id] => 0
            [second] => 
            [minute] => 
            [hour] => 
            [day] => 0
            [monthnum] => 0
            [year] => 0
            [w] => 0
            [category_name] => 
            [tag] => 
            [cat] => 
            [tag_id] => 
            [author] => 
            [author_name] => 
            [feed] => 
            [tb] => 
            [paged] => 0
            [meta_key] => 
            [meta_value] => 
            [preview] => 
            [s] => 
            [sentence] => 
            [title] => 
            [fields] => 
            [menu_order] => 
            [embed] => 
            [category__in] => Array
                (
                )

            [category__not_in] => Array
                (
                )

            [category__and] => Array
                (
                )

            [post_name__in] => Array
                (
                )

            [tag__in] => Array
                (
                )

            [tag__not_in] => Array
                (
                )

            [tag__and] => Array
                (
                )

            [tag_slug__in] => Array
                (
                )

            [tag_slug__and] => Array
                (
                )

            [post_parent__in] => Array
                (
                )

            [post_parent__not_in] => Array
                (
                )

            [author__in] => Array
                (
                )

            [author__not_in] => Array
                (
                )

            [suppress_filters] => 
            [cache_results] => 
            [update_post_term_cache] => 1
            [lazy_load_term_meta] => 1
            [update_post_meta_cache] => 1
            [nopaging] => 1
            [comments_per_page] => 50
            [order] => 
        )

    [tax_query] => WP_Tax_Query Object
        (
            [queries] => Array
                (
                )

            [relation] => AND
            [table_aliases:protected] => Array
                (
                )

            [queried_terms] => Array
                (
                )

            [primary_table] => wp_10_posts
            [primary_id_column] => ID
        )

    [meta_query] => WP_Meta_Query Object
        (
            [queries] => Array
                (
                )

            [relation] => 
            [meta_table] => 
            [meta_id_column] => 
            [primary_table] => 
            [primary_id_column] => 
            [table_aliases:protected] => Array
                (
                )

            [clauses:protected] => Array
                (
                )

            [has_or_relation:protected] => 
        )

    [date_query] => 
    [request] => SELECT   wp_10_posts.* FROM wp_10_posts  WHERE 1=1  AND wp_10_posts.ID IN (899,906,613,522) AND wp_10_posts.post_type = 'product' AND (wp_10_posts.post_status = 'publish')  ORDER BY RAND() 
    [posts] => Array
        (
            [0] => WP_Post Object
                (
                    [ID] => 906
                    [post_author] => 1
                    [post_date] => 2017-04-06 17:54:54
                    [post_date_gmt] => 2017-04-06 17:54:54
                    [post_content] => Magtrol Coupling Guards are easily removable and designed to mount in front of Magtrol HD Series Dynamometers. They are also available for some WB Series Dynamometers.

Coupling Guards help keep objects from vertical interference and aid in preventing accidental coupling contact during rotation. The guard length required will change according to the coupling size used with the dynamometer.

Magtrol Coupling Guards are not explosion proof and are not intended as protection against catastrophic coupling failure.
                    [post_title] => Coupling Guards
                    [post_excerpt] => 
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => coupling-guards
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2023-04-21 21:00:00
                    [post_modified_gmt] => 2023-04-21 15:30:00
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=906
                    [menu_order] => 110
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

            [1] => WP_Post Object
                (
                    [ID] => 613
                    [post_author] => 1
                    [post_date] => 2017-04-05 15:38:07
                    [post_date_gmt] => 2017-04-05 15:38:07
                    [post_content] => Magtrol's Model DSP7000 High-Speed Programmable. Dynamometer Controller employs state-of-the-art Digital Signal Processing Technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Brake Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP7000 can provide complete PC control via IEEE-488 or RS-232 interface. With up to 500 readings per second, the DSP7000 is ideally suited for both the test lab and the production line.
                    [post_title] => DSP7000 - High Speed Programmable Controller
                    [post_excerpt] => 
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => dsp7000-high-speed-programmable-controller
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2023-04-21 20:52:18
                    [post_modified_gmt] => 2023-04-21 15:22:18
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=613
                    [menu_order] => 56
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

            [2] => WP_Post Object
                (
                    [ID] => 522
                    [post_author] => 1
                    [post_date] => 2017-04-05 13:55:52
                    [post_date_gmt] => 2017-04-05 13:55:52
                    [post_content] => Magtrol's M-TEST 7 is a state-of-the-art motor testing program for PC (Windows® 10/11 64-bit) based data acquisition. Used with a Magtrol Programmable Dynamometer Controller, M-TEST 7 works with any Magtrol Dynamometer or In-Line Torque Transducer to help determine the performance characteristics of a motor under test. Up to 63 parameters are calculated and displayed utilizing M-TEST 7's feature-rich testing and graphing capabilities.

National Instruments LabVIEW an integral component of any Magtrol Motor Test System, M-TEST 7 performs ramp, curve, manual, pass/fail, coast, temperature, locked rotor temperature and running heating temperature tests in a manner best suited to the overall efficiency of the test rig. Written in LabVIEW™, M-TEST 7 has the flexibility to test a variety of motors in a multitude of configurations. The data generated from this user-friendly program can be stored, displayed and printed in tabular or graphical formats, and is easily imported into a spreadsheet.

Magtrol can also make custom modifications to the software to meet additional motor testing requirements.

NOTE: M-TEST 7 does not support the following:

    
 	
  • 5240, 4629B or older controllers
    • 
 	
  • 4612B, 4614B or older power analyzers
    • 
 	
  • National Instruments FieldPoint analog I/O
    • 
 	
  • Advantech PCL-725, PCI-1760 digital I/O
    • 


**MTEST-7 Motor Test Software is offered as a single seat license. Additional seats can be purchased and added to the original license. Contact sales for pricing.**

[table id=21 /]

License Verification via Crypkey Casper E-Register

Casper eRegister provides automatic authorization of M-TEST 7 using serial numbers. With this solution, the customer pre-pays the license fee and is then provided with a serial number to automatically obtain a code to unlock M-TEST 7 via the Internet. Casper eRegister works 24/7/365, without human intervention.

Just click on the electronic registration button on the M-TEST 7 license configuration screen.

Analog Input Measurement

Up to 128 thermocouples or analog sensors can be read and monitored during a motor test. Heat rise curves on the bearings, windings and housing of a motor can be performed and air flow/exhaust efficiencies can be measured with an air tool or internal combustion engine. M-TEST 7, with its complete dynamometer control, even allows for analog measurement while performing load simulation for duty cycle and life testing.

Applications

M-TEST 7—besides being well-suited for simulating loads, cycling the unit under test and motor ramping—is also ideal for production line and inspection applications, due to its pass/fail test function. Another time-saving feature that engineering labs will benefit from, is the ability to duplicate tests and run them automatically. This versatile program is extremely valuable to anyone involved in motor testing.

System Minimum Requirements


    
 	
  • Personal computer with Intel® Pentium® i5 processor (or equivalent)
    • 
 	
  • Microsoft® Windows® 10/11 64-bit
    • 
 	
  • 8 GB RAM
    • 
 	
  • 5 GB of available hard drive space
    • 
 	
  • VGA color monitor with minimum screen resolution of 1024 × 768
    • 
 	
  • National Instruments™ PCI-GPIB card, GPIB-USB-HS Interface(available from Magtrol).The GPIB card can be used for interfacing with Magtrol DSP6000, DSP6001 or DSP7000 Controllers.
    • 
 	
  •  In addition, a USB Interface can be used with the DSP7000 or DSP7010 Controller.
    • 



M-TEST 7 Viewer


M-TEST 7 Viewer allows the user to create and modify test setups, and view, graph and compare data – everything standard M-TEST 7 does except perform tests. Free download, unlimited use.

Download M-TEST 7 Viewer
                    [post_title] => M-TEST 7 - Motor Testing Software
                    [post_excerpt] => Download free 30 day trial of M-TEST 7 Motor Testing Software.
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => m-test-7-motor-testing-software
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2024-03-28 01:36:33
                    [post_modified_gmt] => 2024-03-27 20:06:33
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=522
                    [menu_order] => 30
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

            [3] => WP_Post Object
                (
                    [ID] => 899
                    [post_author] => 1
                    [post_date] => 2017-04-06 17:52:48
                    [post_date_gmt] => 2017-04-06 17:52:48
                    [post_content] => If currents continuously reach above 20 amps, an external sensor must be used. Magtrol offers three different types of external shunts for use with Magtrol Power Analyzers. The HA Series shunt, designed for power cable hook-up utilizing 3/8-16 screws, has an insulating base and can be mounted on conductive surfaces. The LAB Series shunt also comes with an insulating base, along with thumb screws for the power leads and knurled nuts on the sensing terminals. The FL Series is a relatively small bus, bar-mounted shunt with large end blocks. The comparatively large end blocks and short spacing aid in cooling and allow the shunt to operate in more extreme environments. All shunts are calibrated on equipment with current certifications traceable to N.I.S.T.
                    [post_title] => External Shunts
                    [post_excerpt] => 
                    [post_status] => publish
                    [comment_status] => open
                    [ping_status] => closed
                    [post_password] => 
                    [post_name] => external-shunts
                    [to_ping] => 
                    [pinged] => 
                    [post_modified] => 2023-04-21 21:00:52
                    [post_modified_gmt] => 2023-04-21 15:30:52
                    [post_content_filtered] => 
                    [post_parent] => 0
                    [guid] => https://www.magtrol.com/?post_type=product&p=899
                    [menu_order] => 112
                    [post_type] => product
                    [post_mime_type] => 
                    [comment_count] => 0
                    [filter] => raw
                )

        )

    [post_count] => 4
    [current_post] => -1
    [in_the_loop] => 
    [post] => WP_Post Object
        (
            [ID] => 906
            [post_author] => 1
            [post_date] => 2017-04-06 17:54:54
            [post_date_gmt] => 2017-04-06 17:54:54
            [post_content] => Magtrol Coupling Guards are easily removable and designed to mount in front of Magtrol HD Series Dynamometers. They are also available for some WB Series Dynamometers.

Coupling Guards help keep objects from vertical interference and aid in preventing accidental coupling contact during rotation. The guard length required will change according to the coupling size used with the dynamometer.

Magtrol Coupling Guards are not explosion proof and are not intended as protection against catastrophic coupling failure.
            [post_title] => Coupling Guards
            [post_excerpt] => 
            [post_status] => publish
            [comment_status] => open
            [ping_status] => closed
            [post_password] => 
            [post_name] => coupling-guards
            [to_ping] => 
            [pinged] => 
            [post_modified] => 2023-04-21 21:00:00
            [post_modified_gmt] => 2023-04-21 15:30:00
            [post_content_filtered] => 
            [post_parent] => 0
            [guid] => https://www.magtrol.com/?post_type=product&p=906
            [menu_order] => 110
            [post_type] => product
            [post_mime_type] => 
            [comment_count] => 0
            [filter] => raw
        )

    [comment_count] => 0
    [current_comment] => -1
    [found_posts] => 0
    [max_num_pages] => 0
    [max_num_comment_pages] => 0
    [is_single] => 
    [is_preview] => 
    [is_page] => 
    [is_archive] => 1
    [is_date] => 
    [is_year] => 
    [is_month] => 
    [is_day] => 
    [is_time] => 
    [is_author] => 
    [is_category] => 
    [is_tag] => 
    [is_tax] => 
    [is_search] => 
    [is_feed] => 
    [is_comment_feed] => 
    [is_trackback] => 
    [is_home] => 
    [is_404] => 
    [is_embed] => 
    [is_paged] => 
    [is_admin] => 
    [is_attachment] => 
    [is_singular] => 
    [is_robots] => 
    [is_posts_page] => 
    [is_post_type_archive] => 1
    [query_vars_hash:WP_Query:private] => 1d27d5c8cf5c8b314927b12a52bc7e6f
    [query_vars_changed:WP_Query:private] => 
    [thumbnails_cached] => 
    [stopwords:WP_Query:private] => 
    [compat_fields:WP_Query:private] => Array
        (
            [0] => query_vars_hash
            [1] => query_vars_changed
        )

    [compat_methods:WP_Query:private] => Array
        (
            [0] => init_query_flags
            [1] => parse_tax_query
        )

)

Related Products