-
View ProductRead moreHRL Series – Anchor Load Cell
HRL Series load cells consist of a high quality stainless steel. This compact load cell is designed specifically for heavy duty use on construction sites and include load cells with a range of 600 … 3 000 kN. Special designs are available upon request. The attached shielded cable includes a water-proof connector with cap. Versions… Read more »
-
View ProductRead moreLB 200 Series – Load Measuring Pins
LB 200 Series Load Measuring Pins can be used alone or as part of a complete measurement system. Magtrol offers a wide range of Load-Force-Weight Transducers in various executions and accuracy classes and our Load Monitoring Units (LMUs) constitute an ideal safe measurement system which continuously checks for overloads and short circuits. MAGTROL Load Measuring… Read more »
-
View ProductRead moreLE Series – Load Measuring Pins
MAGTROL offers a wide range of Load-Force-Weight Transducers with optional integrated electronics or Load Monitoring Units (LMU) with B.I.T.E. functions creating an ideal measurement system which continuously checks for overloads and short circuits. Idealy for use on Safety Applications according to ECE-R10, ISO 13849-1 : CAT4 & PLe (LE 600 Series); ISO 13849-1 : CAT2… Read more »
-
View ProductRead moreMB 102 Series – Miniature Load Measuring Pins
Magtrol Miniature Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s MB 102 Series Miniature Load Pins are rugged… Read more »
-
View ProductRead moreTS 100 Series – Torque Sensors
Magtrol’s TS 100 Series In-LineTorque Sensors provide extremely accurate torque and speed measurement. Each model has an integrated conditioning electronic module providing 0 V DC to ± 5 V DC (±10 V DC) torque output through an 8-pole connector, as well as a USB interface which can be directly connected to a computer. The sensor… Read more »
-
View ProductRead moreTM 300 Series – Torque Sensors
Magtrol’s In-Line Torque Transducers provide extremely accurate torque and speed measurement over a very broad range. Each model has an integrated conditioning electronic module providing a ±5 VDC (±10 VDC) torque output and an open collector speed output. Magtrol Torque Transducers are very reliable, providing high overload protection, excellent long term stability and high noise… Read more »
-
View ProductRead moreHD Series – Hysteresis Dynamometers
Hysteresis Brake Dynamometers (HD Series) are versatile and ideal for testing in the low to medium power range (maximum 14 kW intermittent duty). With a Hysteresis Braking system, the Dynamometers do not require speed to create torque, and therefore can provide a full motor ramp from free-run to locked rotor. Brake cooling is provided by… Read more »
-
View ProductRead moreMicro Dyne System
Finally… a Micro Dyne system designed specifically for your micro motors! With over 50 years’ experience in dynamometer design and torque measurement, Magtrol has revolutionized the industry. Magtrol’s new Micro Dyne, capable of measuring extremely low torques (2.0 mN·m can be resolved to 0.0004 mN·m), is designed exclusively for testing miniature and micro motors. For… Read more »
-
View ProductRead moreWB 23 and WB 27 – High-Speed Eddy-Current Dynamometers
Magtrol’s WB 23 and WB 27 Eddy-Current Dynamometers are designed for very high-speed motors and dental or surgical tool testing applications. By providing a braking torque that is proportional to the rotational speed, rated torque is reached at the rated speed. The Dynamometer features a low level of inertia, due to small rotor dimensions, and… Read more »
-
View ProductRead moreWB 32 Series – High-Speed Eddy-Current Dynamometers
FEATURES 2 Models with maximum Torque: 400 mN·m & 800 mN·m Speed: up to 80 000 rpm Power: 0.5 kW & 1 kW Low Moment of Inertia Stable & smooth Braking Torque Data acquisition via DSP 7010 Series Controller & M-TEST Software Built-in Electronics with Torque & Speed Measurement and Excitation Supply DESCRIPTION Magtrol’s WB 32 Series –… Read more »
-
View ProductRead moreWB Series – Eddy-Current Dynamometers
Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as the speed increases, reaching peak torque at rated speed. The dynamometers have low inertia as a result of small rotor diameter. Brake cooling is provided by… Read more »
-
View ProductRead morePB Series – Powder Brake Dynamometers
The Powder Brake Dynamometer (PB Series) contains, as its name suggests, a magnetic powder. The electrical current passing through the coil generates a magnetic field, which changes the property of the powder, thus producing a smooth braking torque through friction. They are ideal for applications operating in the low to middle speed range or when… Read more »
-
View ProductRead moreTandem Series – In-Line Double Dynamometers
Eddy-current Brake Dynamometers (WB series) provide increasing torque as the speed increases, reaching peak torque at rated speed. They are ideal for applications requiring high speeds and also when operating in the middle to high power range. Powder Brake Dynamometers (PB Series) provide full torque at zero speed and are ideal for applications operating in… Read more »
-
View ProductRead moreMSD System – Mega Speed Dynamometer
The MSD – Mega Speed Dynamometer was developed for the testing of very high speed motors such as BLDC, Dental Handpieces, Air Turbines and Surgical Tools. The braking effect is based on Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a Reaction Torque… Read more »
-
View ProductRead more4 Quadrant Dynamometer Test System
Magtrol’s 4 quadrant motorized dynamometers provides expanded testing flexibility over a typical braking dynamometer. With the ability to bring the motor under test (MUT) to synchronous RPM before beginning a test, repeatability is improved. Since the motor windings are at ambient temperature before starting a ramp test, wattage is more consistent. Custom Software is required… Read more »
-
View ProductRead moreCustom Motor Test Systems
Magtrol’s Customized Motor Test Systems (CMTS) are PC-based, turnkey systems custom designed and built to meet your specific motor testing requirements. By integrating Magtrol’s motor test equipment with power supplies, adaptable fixtures, custom tables/cabinets, printers, etc., Magtrol’s engineering team can design and build a system that precisely suits the customer’s needs. A Magtrol CMTS may… Read more »
