-
View ProductRead moreATK-25 Alignment Tool Kit
The ATK-25 is a unique shaft alignment solution, specially designed for small equipment. The ATK can be used to measure parallel and angular alignment, for correction of pitch, yaw, vertical, and horizontal positioning. It works in crowded or constrained locations where other tools will not fit. Alignment is critical for rotating equipment. Poor alignment can… Read more »
-
View ProductRead moreFOURAX-700 Multi-Axis Positioner
Download the Fourax-C1 Software.
-
View ProductRead moreSGS-350 Series – Strain Gauge Simulator
The Magtrol SGS-350 is a strain gauge bridge simulator made entirely with passive components and an aluminum housing designed for use in extremely harsh environments. The SGS-350 can be used in place of a strain gauge sensor with 0 … 2 mV/V sensitivity, in order to test or calibrate an LMU 210 Series Load Monitoring… Read more »
-
View ProductRead more5242 – Power Amplifier
The Model 5242 is a voltage-controlled power amplifier designed exclusively for Magtrol’s Model HD‑825 Hysteresis Dynamometer. Because of its double braking system, the HD‑825 requires more than 4 amps of power in order to reach full torque. The 5242 (which can provide up to 5 amps of output current) is necessary in order to amplify the power… Read more »
-
View ProductRead more
5241 – Power Amplifier
The Model 5241 is a voltage-controlled power amplifier designed exclusively for Magtrol’s Model HD-825 Hysteresis Dynamometer. Because of its double braking system, the HD-825 requires more than 4 amps of power in order to reach full torque. The 5241 (which can provide up to 5 amps of output current) is necessary in order to amplify… Read more »
-
View ProductRead more5502/5503 – Manual Dynamometer Switch Box
Magtrol Models 5502 and 5503 are manually-operated switch boxes that permit the connection of up to three Magtrol Dynamometers to a single Dynamometer Controller. Use of the switch boxes facilitates quick and easy interfacing to multiple dynamometers without the need to disconnect and reconnect the brake and control cables. For Magtrol WB Eddy-current or PB… Read more »
-
View ProductRead more5500/5501 – Manual Dynamometer Switch Boxes
Magtrol Models 5500 and 5501 are manually-operated switch boxes that permit the connection of up to three Magtrol Dynamometers to a single DSP7000 Dynamometer Controller. Use of the switch boxes facilitates quick and easy interfacing of multiple dynamometers without the necessity of disconnecting and reconnecting the brake and control cables. For Magtrol WB Eddy-current or… Read more »
-
View ProductRead moreDSP7010 Series – Dynamometer Controller
Magtrol’s DSP 7010 Series – Dynamometer Controller employs advanced Digital Signal Processing technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP 7010 can provide complete PC control via the USB or GPIB interface. With up to 488… Read more »
-
View ProductRead moreKG-06 Series – Extensometer
The Magtrol KG-06 Extensometer is designed for measuring deformations of construction or machined parts under load. Because its output signal is proportional to the applied load, it can be used as either a load cell or a force transducer.
-
View ProductRead moreDB-11 – Force Transducer
The Magtrol DB-11 Transducer is designed for measuring both static and dynamic forces. Using strain gauge technology, a deformation of the sensing element provides an electrical signal proportional to the force being measured.
-
View ProductRead moreDB-DA and DB-DC - Transducers for Ball Bearing Radial Force Measurement
Magtrol DB-DA and DB-DC transducers are designed for measuring radial forces in ball bearings. Available in several diameters and temperature ranges, these transducers incorporate strain gauge technology and provide a signal output proportional to the force to being measured.
-
View ProductRead moreMBB 470 Series – Miniature Force Transducers
The Magtrol MBB 470 Series Miniature Force Transducers are designed for the measurement of very small positive and negative charges. Entirely made of aluminum, the MBB 470 combines lightness and stability and has excellent overload capacity.
-
View ProductRead moreMBB-02 Series – Miniature Force Sensors
The MBB-02 Miniature Force Sensor is designed for micro-measurement. It is used by many high end watch manufacturers for measuring the friction in the movement of mechanical watches and is also used in various medical applications. The MBB-02 is entirely made of aluminum to combine lightness and stability of measurement. It has a nominal capacity… Read more »
-
View ProductRead moreMD-01 – Transducers
Magtrol’s MD-01 Transducers are designed for measuring static and dynamic compression loads. Using strain gauge technology, deformation of the sensing element provides an electrical signal proportional to the load or force being measured. With quick single-screw mounting, this transducer can be easily integrated into wide array of applications.
-
View ProductRead moreSK-01 Series – Clamping Force Transducer
The Magtrol SK-01 Force Transducer, based on strain gauge technology, is ideal for the control of ropes, brake clamps and similar devices. It measures the clamping force, independent of the clamp, on the longitudinal axis of the transducer.
-
View ProductRead moreZB Series – Load Cells
The load cells of the ZB series have been designed for use under industrial conditions in hybrid type weighing systems up to Class III, for which calibration is obligatory. Made entirely of stainless steel , they are an excellent choice for weighing systems in the foodstuff industry. The sensing element itself is a twin-bend design… Read more »
