Model 6400 Torque Transducer Display

Designed to work with all TM, TMHS, and TMB In-Line Torque Transducers, this easy-to-use device powers the torque meter and utilizes high speed Digital Signal Processing (DSP) to display torque, speed, mechanical power and direction of rotation. The 6400 can be used as a basic display, as an interface with Torque 1.0 Software or on the production line using its pass/fail feature. The unit includes an auxiliary analog input for the option of testing with an additional transducer and a special tare function to help offset any slight residuals caused by couplings or suspended loads. The 6400 also has IEEE-488 and RS-232 interface capabilities, allowing a PC-controlled environment that can yield high data acquisition rates of up to 100 torque and speed readings per second.

Features

For use with all Magtrol TM, TMHS and TMB In-Line Torque Transducers
Pass/Fail Testing for torque, speed and auxiliary input
BITE: Built-In Test Equipment
RS-232 & IEEE-488 Interfaces
High Speed Data Acquisition: 100 torque and speed readings per second via IEEE bus
High Quality, Easy-to-Read Vacuum Fluorescent Readout: Displays torque, speed, power and direction of rotation

Torque Measurement Options: Standard English, metric and SI settings
Overload Indication
Tare Function
Internal Data Storage: Up to 100 data points
Auxiliary ± 10 VDC Analog Input for additional transducer
Access to TM signals via back panel BNC connectors
Includes Magtrol Torque 1.0 Software
Closed Box Calibration
19" (482.6 mm) Rack Mounts with Handles

Pass/Fail Motor Testing

The Model 6400 comes with an easy-to-use motor testing Pass/Fail feature. This feature is ideal for quick pass/fail (go/no go) testing in production and incoming inspection applications. When the 6400 is operated in the Pass/Fail mode, one of three readings is used as the tested parameter: torque, speed or auxiliary transducer. The two parameters not used are set with user defined upper and lower acceptable limits. As the motor is loaded to the tested parameter value (for example, speed), the other two parameters (in this case, torque and transducer) will indicate PASS or FAIL. The display will show pass or fail, or can be toggled to display the actual values.