electromagnetic brakes


		HB/MHB Hysteresis Brake Specifications - Metric

For complete technical specifications and a general dimension drawing, download the data sheet. For detailed dimension drawings…

Click on the

icon in the table below. A PDF document will open in a new window.
(Adobe Acrobat Reader 7.0, or later, is required.)

Hystersis Brake Model	Matched Bake Model	Minimum Torque at Rated Current	Rated Current	Maximum Speed	Kinetic Power*		View Drawing	Typical Performance Curves
		Minimum Torque at Rated Current	Rated Current	Maximum Speed	5 Minutes	Continuous	View Drawing	Typical Performance Curves
		N·m	mA	rpm	W	W	PDF	PDF
HB-3M-2	MHB-3M-2	0,02	145	20'000	20	5
HB-10M-2	MHB-10M-2	0,07	133	20'000	35	8
HB-20M-2	MHB-20M-2	0,14	217	20'000	50	12
HB-50M-2	MHB-50M-2	0,35	253	15'000	90	23
HB-140M-2	MHB-140M-2	1,00	253	12'000	300	75
HB-250M-2	MHB-250M-2	1,75	270	10'000	450	110
HB-450M-2	MHB-450M-2	3,20	442	8'000	670	160
HB-750M-2	MHB-750M-2	5,00	383	7'000	1'000	200
HB-1750M-2	MHB-1750M-2	13,00 **	600	6'000	1'200	350
HB-3500M-2	---	26,00 ***	1200	6'000	2'400	600

*	Kinetic power ratings are maximum values based on limiting coil and/or bearing temperature to approximately 100 ºC, and should not be exceeded. Actual values in service may vary ±50% depending on mounting, ventilation, ambient temperature, etc.
**	13 N·m is attainable @ approx. 600 mA. This value may decrease to 12.36 N·m if the brake is powered by any power supply or controller limited to 500 mA.
***	26 N·m is attainable @ approx. 1200 mA. This value may decrease to 24.72 N·m if the brake is powered by any power supply or controller limited to 1000 mA.

This icon also indicates that a 3D Solid Model is available for this unit.
Contact Magtrol Customer Service.

Top of page

Magtrol Inc. (USA): +1-716-668-5555 • magtrol@magtrol.com | Magtrol SA (Switzerland): +41 (0)26 407 3000 • magtrol@magtrol.ch

HB/MHB Hysteresis Brake Specifications - Metric