air-cooled brakes


		AHB Compressed-air-cooled Brake Specifications

For complete technical specifications, including power absorption curves, download the data sheet. For detailed dimension drawings…

Click on the icon in the table below. A PDF document will open in a new window.
(Adobe Acrobat Reader 7.0, or later, is required.)

Brake Ratings

Model	Minimum Torque at Rated Current	Rated Current	Max. Speed	Kinetic Power*				View Drawing	Typical Performance Curves
				With Air		Without Air
				5 Minutes	Continuous	5 Minutes	Continuous
	N·m	mA	rpm	W	W	W	W	PDF	PDF
AHB-1	1.00	400	25000	1200	1200	250	55
AHB-1.75	1.75	400	25000	1300	1300	450	70		contact Magtrol
AHB-3	3.50	750	20000	1800	1800	800	160
AHB-5	5.00	383	15000	2500	1000	1300	120
AHB-6	6.00	1500	20000	3000	3000	1400	225		contact Magtrol
AHB-12	12.00	1200	12000	2800	1800	2200	250
AHB-24	24.00	2400	12000	5300	3000	4000	450

*	Kinetic power ratings are maximum values based on limiting coil and/or bearing temperature to approximately 100 ºC, and should not be exceeded.

This icon also indicates that a 3D Solid Model is available for this unit.
Contact Magtrol Customer Service.

Air Requirements

Model	Air Supply Pressure			Air Volume/Consumption		Supply Tube Fitting
	Air Supply Pressure			Air Volume/Consumption		Outer Diameter	Pipe Thread Size
	PSI *	bar	kPa	SCFM	l/min	mm	NPT
AHB-1	90	6.21	620.5	10	283	8	1/8"
AHB-1.75 **	90	6.21	620.5	10	283	8	1/8"
AHB-3	90	6.21	620.5	15	425	10	1/4"
AHB-5	90	6.21	620.5	15	425	10	1/4"
AHB-6	90	6.21	620.5	20	567	10	1/4"
AHB-12	90	6.21	620.5	20	567	10	3/8"
AHB-24	90	6.21	620.5	20	567	10	3/8"

*	The air pressure to the (at the) brake will be called out at 85 to 95 PSI. This range is thought to allow a user to directly attach to a compressor line without local regulation and filtering.

Top of page

Magtrol Inc. (USA): +1-716-668-5555 • magtrol@magtrol.com | Magtrol SA (Switzerland): +41 (0)26 407 3000 • magtrol@magtrol.ch

AHB Compressed-air-cooled Brake Specifications