 |
|
|
|
|
 |
Application
Magtrol developed two automatic testing benches for front
wiper motors, rear wiper motors (pendulum with measure
of angle) and ABS motors (excenter). The test setup is
equipped to handle torque ratings from 3 to 50 N·m
and a speed range of 0 to 10,000 rpm. |
Custom
Motor Fixture
The fixture is flexible, permitting easy
adaptation of any of the 6 types of motors to be
tested. The motor is first mounted onto a disc plate,
which allows specific adaptation to the motor fixing
points. The disc is then self-centered and fast
clamped onto a vertical plate. The vertical plate
is mounted on sliding bars to allow the axial positioning
of each motor. The couplings used are also fast
clamping with a tapered, press-fit connection. |
|
| Components |
- Heavy-duty equipment rack
- 2PB65 Powder Brake Dynamometer with water-cooling
(for medium and higher range motors) or HD-700 Hysteresis
Dynamometer (for low range motors)
- DSP6001 High Speed Programmable Dynamometer Controller
- Custom M-TEST 4.0 Motor Testing Software
- 6510e Single-Phase Power Analyzer
- Power Supply (3 kW-100 A)
- Custom Motor Fixture & Couplings
- Laptop Computer
- Printer
|
Testing
Magtrol's Wiper Motor CMTS provides high repeatability
and quick response time for sample lab testing. A single
wiper motor can be tested within 3 minutes time including
fixturing, adaptation and loading the test setup from
the software. Data can be displayed in either graphical
or tabular format for up to 10 parameters including voltage,
current, power, torque, speed, efficiency and temperature.
The software allows the user to quickly acquire data,
store several different test configurations and print
customized test certificates. |
|
| |
|
Top of page
|
| Magtrol Inc. (USA): +1-716-668-5555 • magtrol@magtrol.com | Magtrol SA (Switzerland): +41 (0)26 407 3000 • magtrol@magtrol.ch |
|
|
|
|
|
|
| © 1995-2008 Magtrol, Inc. |
|
|
