|
 Magtrol offers these calibration beam assemblies and weights for calibrating HD-Series Hysteresis Dynamometers.
To perform a successful dynamometer calibration, precision weights heavy enough to apply a torque at or close to the full scale rating are required. Magtrol WT Series Calibration Weights are equal to the dynamometer's torque value, divided by the distance between the outer pin and centerline of
the corresponding CB Series Calibration Beam. Calibration Weights are available in English or SI units. Calibration Beams are marked for both English and SI weights.
For detailed dimension drawings, click on the model's underlined link.
A PDF document will open in a new window.(Adobe Acrobat Reader 7.0, or later, is required.)
Calibration
Beam
Assembly |
For
Hysteresis
Dynamometer |
English |
SI |
Weight
Type |
Full Scale
Torque |
Pin
Location
in |
Weights |
Full Scale
Torque |
Pin
Location
cm |
Weights |
| Mass |
Model |
Mass |
Model |
| CB-106 |
HD-106 |
2.50
oz·in |
2.500 |
1 oz |
WT-106 |
18.00
mN·m |
9.18 |
20 g |
WT-106M |
hook |
| CB-100 |
HD-100 |
11.00 oz·in |
5.500 |
2 oz |
WT-100 |
80.0 mN·m |
8.16 |
100 g |
WT-100M |
| CB-400 |
HD-400 |
40.0
oz·in |
5.000 |
8 oz |
WT-400 |
280
mN·m |
14.28 |
200 g |
WT-400M |
| CB-500 |
HD-500 |
120.0 oz·in |
7.500 |
1.0 lb |
WT-500 |
850 mN·m |
17.34 |
500 g |
WT-500M |
| HD-510 |
| HD-505 |
240 oz·in |
7.500 |
2.0 lb |
WT-505 |
1700 mN·m |
17.34 |
1.0 kg |
WT-505M |
| HD-515 |
| CB-700 |
HD-700 |
440
oz·in |
11.000 |
2.5 lb |
WT-700 |
3.10 N·m |
31.61 |
1.0 kg |
WT-700M |
| HD-710 |
| HD-705 |
55.0
lb·in |
11.000 |
5.0 lb |
WT-705 |
6.20 N·m |
31.61 |
2.0 kg |
WT-705M |
| HD-715 |
| CB-800 |
HD-800 |
125.0
lb·in |
15.625 |
8.0 lb |
WT-800 |
14.00 N·m |
47.59 |
3.0 kg |
WT-800M |
slotted
with
hanger |
| HD-810 |
| HD-805 |
250
lb·in |
15.625 |
16.0 lb |
WT-805 |
28.0 N·m |
47.59 |
6.0 kg |
WT-805M |
| HD-815 |
| CB-825 |
HD-825 |
500
lb·in |
20.000 |
25.0 lb |
WT-825 |
56.5 N·m |
38.41 |
15.0 kg |
WT-825M |
|
