The Load-Force-Weight Sensor family is a complement to Magtrol's range of load measuring pins. These sensors/transducers can be used in different applications where the load measuring pin cannot be mounted. Our various executions and precision classes provide you with great flexibility for your application.
Used with our load monitoring units or signal conditioners, Magtrol Load-Force-Weight Sensors constitute an ideal load and weighing measurement system which continuously checks for defined loads and overloads.
| LOAD SENSORS |
 |
 |
 |
 |
 |
 |
| 0.01 N to 5 N |
0.5 N to 20 N |
20 N to 50 N |
20 N to 100 N |
50 N to 1200 N |
200 N to 5 kN |
| For small precision applications (i.e. watchmaking) |
For measuring very small positive and negative loads |
|
For single cell applications or the parallel connection of two or more transducers |
For ball bearing radial force measurement |
For measuring static and dynamic compression loads |
| MBB-02 Miniature Force Transducer |
MBB-01 Miniature Force Transducer |
DB-04 Load Cell/Force Transducer |
DB-11 Load Cell/Force Transducer |
DB-DA and DB-DC Force Transducers |
MD-01 Transducer* |
| LOAD CELLS |
 |
 |
 |
 |
 |
 |
5 kg to 1000 kg
(50 N to 10 kN) |
10 kg to 1000 kg
(100 N to 10 kN) |
0.5 t to 5 t
(5 kN to 50 kN) |
0.5 t to 5 t
(5 kN to 50 kN) |
0.5 t to 15 t |
5 t to 40 t
(50 kN to 400 kN) |
| For
application in platform scales |
For use in calibrated weighing systems (esp. food industry) |
For flat platform scales with industrial
applications |
For use in calibrated weighing systems |
|
For use in vehicle weighing systems |
| ZC |
ZB* |
ZD* |
ZS* |
5205L Tension
Load Cell |
ZN* |
| FORCE TRANSDUCERS |
 |
 |
 |
|
 |
 |
| 1 kN to 200 kN |
100 N to 10 kN |
500 N to 100 kN |
100 N to 50 kN |
10 N to 50 kN |
up to 10 kN |
For measurement of static and dynamic
tensile and pressure forces |
For
measurement
of static and dynamic pressure forces |
For measurement of static and dynamic forces |
|
| ZF |
ZF-S |
ZM* |
ZM-S |
ZP-S |
ZS-B |
| CABLE FORCE TRANSDUCERS |
STRAIN TRANSDUCERS |
 |
 |
 |
 |
 |
 |
| impedance 350 Ohms |
10 kN to 100 kN |
impedance 350 Ohms |
KG-04
(coming soon) |
impedance 1000 Ohms |
impedance 5000 Ohms |
| For hoisting and crane security; suitable for cable diameters 8 to 22 mm |
|
For welding to steel structures such as railway rails, load checking devices and similar long-term outdoor applications |
For measuring deformations of construction or machined parts under load |
For measuring static or dynamic strain forces directly
on machine mechanical parts. |
| SK-02 |
ZL-03 |
KG-03 Spot-welded Extensometer* |
KG-05 Extensometer |
SD-101 |
* Hermetically-sealed housing (IP 67) For use in extreme environmental conditions.
|
