Magtrol  
Brakes and Clutches
Power Supplies
 
 
PRODUCTS
SERVICES
SUPPORT
DATA SHEETS
COMPANY
CONTACT
SITE MAP
 
 

Power Supplies

 
Magtrol offers four different power supplies for its Hysteresis Brakes: Model 5200, Model 5210, Model 5250 and VM Series.
 
5200 5210 5250 VM Series
Brake Voltage 12, 24, 90 VDC 12, 24, 90 VDC 24 VDC 24 VDC
Control Function voltage, unregulated current, regulated current, regulated current, regulated
Current Ranges 5200-1: 300 mA
5200-2: 1000 mA
5200-3: 1500 mA
5210-1: 50, 150, 300 mA
5210-2: 200, 500, 1000 mA
5210-3: 300, 750, 1500 mA
200, 500, 1000 mA <1A VM6
<3A VM8
Braking Control 10-turn
potentiometer
10-turn
potentiometer or
external 0–5 VDC input
10-turn
potentiometer or
external 0–5 VDC input
0-10 VDC
0-20 mA
4-20 mA
Display none LCD - brake current none none
Computer Interface none none none none
Current Monitor Output none none 0-200 mV DC none
Power Requirements 100 VA 100 VA 100 VA 2.1 W + Load Power
Voltage Requirements 120/240 VAC
60/50 Hz
120/240 VAC
60/50 Hz
120/240 VAC
60/50 Hz
20-30 VDC
70 mA + Load Current
 
 

Model 5200 Power Supply
The Model 5200 is a basic unregulated power supply that is designed for use with Magtrol's Hysteresis Brakes and Clutches. The 5200 is available in either 12, 24 or 90 VDC voltages, corresponding to the available hysteresis brake/clutch coil voltage options. Braking control is enabled via a 10-turn potentiometer and adjustment knob located on the front panel. 5200
 
Data SheetManual
 

Model 5210 Current Regulated Power Supply

The 5210 is a current-regulated power supply and display that is designed for use with Magtrol's Hysteresis Brakes and Clutches. With regulated current, torque drift caused by temperature changes within the brake coil is eliminated. The 5210 is a solid-state control that provides smooth application of current from zero to maximum.

The 5210 is available in either 12, 24 or 90 VDC voltages, corresponding to the available hysteresis brake/clutch coil voltage options. Braking power can be controlled manually from either the 10-turn potentiometer and adjustment knob on the front panel, or externally from the 0-5 VDC input when remote operation is desired. An LCD readout conveniently displays the applied braking current.

5210
 
Data SheetManual
 

Model 5250 Current Regulated Power Supply
The 5250 is an open frame, current-regulated power supply that is designed for use with Magtrol's Hysteresis Brakes and Clutches. With regulated current, torque drift caused by temperature changes within the brake coil is eliminated. The 5250 is a solid-state control that provides smooth application of current from zero to maximum. Braking control is enabled by either by a 10-turn potentiometer, or by an external 0-5 VDC control signal. 5250
 
Data SheetManual
 

VM Series Proportional Amplifier/Controller
The VM Series Power Amplifier is used to supply and control power (up to 3 A) to Magtrol Hysteresis Brakes and Clutches. There are two modes possible:
  • Proportional Amplifier (control loop)
  • Proportional Controller to Set Up Control Circuits (for pressure, speed, etc.)
vm8
Data Sheet
 
Back to top
 
Magtrol, Inc (USA): 716-668-5555 • magtrol@magtrol.com ~ Magtrol SA (Switzerland): 41 (0)26 407 3000 • magtrol@magtrol.ch
Magtrol Contact Us English French German Chinese India Russian Motor Test Equipment Torque Transducers Load-Force-Weight Systems Brakes and Clutches Displacement Rotary Transmitters